Instruction manual

Prosilica GC Technical Manual V2.1.0
9
Introduction
Precautions
Cleaning optics
Caution

Do not disassemble the camera housing. Warranty is
void if camera has been disassembled.
This camera contains sensitive internal components.
Caution

Keep shipping material.
Poor packaging of the product may cause damage during
shipping.
Caution

Verify all external connections.
Verify all external connections in terms of voltage levels,
power requirements, voltage polarity, and signal integrity
prior to powering the device.
Caution

Cleaning.
This product can be damaged by some volatile cleaning
agents. Avoid cleaning the image sensor unless absolutely
necessary. Please see instructions on optics cleaning in
this document.
Caution

Do not exceed environmental specifications.
See environmental specifications limits in the Specifications
section of this document. Special care must be taken to
maintain a reasonable operating temperature. If the camera
is operated in temperatures higher than the specified range,
the camera should be mounted on a heat sink.
Caution

Allied Vision does not warranty against any physical
damage to the sensor/filter/protection glass or lenses.
Use utmost care when cleaning optical components.