Installation manual

AVT GigE Cameras Installation Manual V1.0.1

Safety instructions

Caution



Board level cameras: General warnings

• Be sure that all power to your board level camera is

switched off before mounting the sensor board or making

connections to the camera.

• Do not connect or disconnect any cables during an

electrical storm.

• Do not use your board level cameras during an electrical

storm.

• To help avoid possible damage to the sensor board or

main board, wait 5 seconds after power is switched off,

before connecting or disconnecting any cable to the

board level cameras.

• Keep your board level cameras away from radiators and

heat sources.

• Avoid contact of board level cameras with liquids.

Caution



Board level cameras: Loading

• Avoid any mechanical forces to the board level cameras,

the boards and its components, especially torsional, ten-

sile and compressive forces.

• To avoid damages of the boards, provide cables with an

external pull relief so that no force is applied to the con-

nectors itself.

Caution



Board level cameras: Dirty environments

• Always use clean boards.

• To protect the board level cameras from debris always use

in a clean environment or a protective housing.