Instruction manual

Prosilica GE Technical Manual V2.0.2
42
Camera interfaces
Camera I/O connector pin assignment
The general purpose I/O port uses a Hirose HR10A-10R-12SB connector on the
camera side. The mating cable connector is Hirose HR10A-10P-12P.
Figure 29: Camera I/O connector pin assignment
Note

This cable side Hirose connector can be purchased from AVT.
AVT P/N: K7600039
Pin Signal Direction Level Description
1 In 1 In TTL max. 5 V Camera input
galvanic isolated (SyncIn1)
2 Out 2 Out TTL max. 5 V Camera output 2
galvanic isolated (SyncOut2)
3 Out 3 Out TTL max. 5 V Camera output 3
galvanic isolated (SyncOut3)
4 RxD RS-232 In RS-232 Terminal receive data
5 TxD RS-232 Out RS-232 Terminal transmit data
6 Reserved --- --- ---
7 Reserved --- --- ---
8 Reserved --- --- ---
9 Reserved --- --- ---
10 Isolated IO
GND
In/Out Common GND for
In/Out
Isolated input and output
signal ground
11 Isolated IO
GND
In/Out Common GND for
In/Out
Isolated input and output
signal ground
12 Isolated IO
GND
In/Out Common GND for
In/Out
Isolated input and output
signal ground
9 1
2
3
4
5
6
7
8
12 11
10