Instruction Manual

Data interface

Goldeye Technical Manual V2.5.0

Gain (CC3)

With the camera control signal CC3 the camera gain can be switched. If CC3 is

logically 1 the camera works with a gain value of one.

If the CC3 port is logically 0 the gain value is set to 10 (Goldeye xy-008) or 20

(Goldeye xy-032).

IOD mode (CC4)

The camera control signal CC4 switches between the continuous free-running

operation with fixed exposure time of 10 ms /5.4 ms (Goldeye xy-008) or

33.3 ms (Goldeye xy-032) on the one hand and the shutter- and image-on-

demand operation on the other hand.

If CC4 is logically 0, the image-on-demand mode is set. The camera will output

one image for every exposure impulse it receives via trigger input (CC1 or opto-

coupler input).

If CC4 is logically 1, the camera operates in continuous mode. As a second input

signal pin 9 of the 15 pin D-sub connector also controls the IOD mode. If one of

these two inputs selects IOD mode, it overrides the continuous mode selection

of the other one.

GigE feature name

(CameraSpecialFeatures)

Feature visibility Description

HighSpeedMode Beginner Turn on or off the high-speed mode with reduced

resolution

(320x256 @118 fps / 320x160 @186 fps)

Table 23: Camera special feature: High-speed mode

GigE feature name

(AnalogControls)

Feature visibility Description

Gain Beginner This feature controls the selected gain as a raw

integer value.

Table 24: Camera special feature: Gain