Instruction Manual

Goldeye Technical Manual V2.5.0

Recording of temporary reference images

(A, B, J, K)

For an optimal image quality both reference images of the two-point correction

may temporarily be replaced by newly recorded ones within the actual correc-

tion memory page S. For recording one requires a reference area with a spa-

tially constant brightness. The reference area is placed in front of the camera

filling the complete image and being out of focus of the lens. By assignment of

a special value to parameter A, the recording of a low (dark) reference image

can be started now, or when assigning to parameter B the recording of a high

(light) reference image.

Example

New recording of a low reference image of the two-point correction within

actual correction memory page S.

GigE Feature Name Feature Visibility Description

TPC_OperationMode Expert Operation mode of the two-point

correction.

(E=<value> command)

TPC_CorrectionData_FileNumber Expert File number of the flash file

containing the set values for the

two-point correction.

(N=<value> command)

TPC_SetValue_LowRef Expert Define the set value for the low

reference image of the two-point

correction.

(J=<value> command)

TPC_SetValue_HighRef Expert Define the set value for the high

reference image of the two-point

correction.

(K=<value> command)

TPC_FirstImage_LowRef Expert File number of the first low

reference image of the two-point

correction.

(A=<value> command)

TPC_FirstImage_HighRef Expert File number of the first high

reference image of the two-point

correction.

(B=<value> command)

Table 35: GigE feature: TwoPointCorrection (TPC)