Instruction Manual

Goldeye Technical Manual V2.5.0

• a: Controls the configuration of the serial port.

• e: Controls the echo mode.

• x: Controls the baud rate of the serial port.

Example

Set the factory default (115200 Baud and activate serial interface via Camera

Link / Gigabit Ethernet).

>s=2A[CR]

s2A Baud rate

FEDCBA9876543210

--------eaa-xxxx

rw rw rw rw rw rw rw

Bit group Value (hex) Description

O110 Baud

1300 Baud

2600 Baud

3 1200 Baud

4 2400 Baud

5 4800 Baud

6 9600 Baud

7 19200 Baud

8 38400 Baud

9 57600 Baud

A 115200 Baud

00 RS232 via 15 pin SUB-D only

01 Frame grabber serial port (Camera Link or Pleora device port serial IO)

10 Additionally activate second channel via Pleora device port bulk 0

(MODE:UART) GigE interface only

11 Reserved

0 Each character received from the host is echoed back to it

1No Echo

Table 44: Baud rates: values

Note



This function is not available as GigE Vision feature.