User Manual

Display camera live images

How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0

If the GigE VDS Camera Integration DLL is not installed, the Programmable

Logic Controller of the IP Engine and the image format has to be setup manu-

ally:

7. After connecting to the camera click Configure.

8. Adjust the settings for I0 … I7 and the Lookup Table as follows:

9. Click Pixel tab and select the correct Color space and Pixel depth.

10. Click Image tab and adjust the image size corresponding to the used

camera.

Figure 24: Pleora Coyote: Configuration