User Manual

Appendix

How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0

ImageSizeControl

AcquisitionControl

Feature Description

SensorWidth Maximum width of the sensor in pixels.

SensorHeight Maximum height of the sensor in pixels.

WidthMax This feature represents the maximum width (in pixels) of the

image after horizontal binning, decimation or any other function

changing the horizontal dimensions of the image.

HeightMax This feature represents the maximum height (in pixels) of the

image after vertical binning, decimation or any other function

changing the vertical dimensions of the image.

Width This feature represents the actual image width expelled by the

camera (in pixels).

Height This feature represents the actual image height expelled by the

camera (in pixels).

OffsetX This feature represents the horizontal offset from the origin to

the AOI (in pixels).

OffsetY This feature represents the vertical offset from the origin to the

AOI (in pixels).

BinningHorizontal Number of horizontal pixels to combine together. This increases

the intensity (or signal-to-noise ratio) of the pixels and reduces

the horizontal resolution (width) of the image.

BinningVertical Number of vertical pixels to combine together. This increases the

intensity (or signal-to-noise ratio) of the pixels and reduces the

vertical resolution (height) of the image.

DecimationHorizontal Unused.

DecimationVertical Unused.

PixelFormat List with all available pixel formats of the camera, e.g. MONO12.

TestImageSelector Enables or disables the internal test image generator of the

camera.

HighSpeedMode Turn on or off the high-speed mode with reduced resolution.

Table 6: Camera standard feature: ImageSizeControl

Feature Description

AcquisitionMode This feature controls the acquisition mode of the software. This

feature works independently (!) of the chosen camera mode

(Continuous, IOD hardware trigger, IOD hardware timer). It

describes how many frames should be acquired.

AcquisitionStart Starts the image acquisition of the camera.

Table 7: Camera standard feature: AcquisitionControl