User Manual

Appendix
How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0
43
AnalogControls
AcquisitionStop Stops the image acquisition of the camera.
TriggerMode Modifies the trigger mode of the camera. When the trigger mode
is Off, the camera will generate frames independently. When the
trigger mode is On the camera is switched to the so called IOD
(Image On Demand) mode. In this mode the camera waits for an
external trigger signal or an timer pulse generated internally. To
control exposure and dark time trigger mode must be switched to
On.
ExposureMode Start or stop the internal exposure signal timer.
ExposureTime This feature is used to set the Exposure time (in microseconds).
ExposureTimeAbs This feature is used to set the Exposure time (in microseconds).
Deprecated.
ExposureTimeGranularity Exposure time granularity
ExposureTimeAbsMs This feature is used to set the Exposure time (in milliseconds).
DarkTime This feature is used to set the Dark time (in microseconds).
DarkTimeAbs This feature is used to set the Dark time (in microseconds).
Deprecated.
DarkTimeGranularity Dark time granularity
DarkTimeAbsMs This feature is used to set the Dark time (in milliseconds).
Feature Description
Gain This feature controls the selected gain as a raw integer value.
Table 8: Camera standard feature: AnalogControls
Feature Description
Table 7: Camera standard feature: AcquisitionControl