User Manual

Introduction

How to install a GigE camera (Bigeye/Pearleye/Goldeye) V2.1.0

Introduction

This Manual describes in depth the installation of the AVT GigE cameras (Big-

eye/Pearleye/Goldeye).

Document history

Manual overview

This manual overview outlines the contents of each chapter of this manual.

•Chapter Contacting Allied Vision Technologies on page 5 lists AVT contact

data (phone numbers and URLs) for both:

– Technical information / ordering

– Commercial information

•Chapter Introduction on page 6 (this chapter) gives you the document his-

tory, a manual overview (short description of each chapter) and conven-

tions used in this manual (styles and symbols).

•Chapter IP-based camera access: background on page 10 gives you back-

ground information when working with IP-based cameras.

•Chapter Installing GigE driver from Pleora on page 18 gives you installing

descriptions when working with the GigE driver from Pleora.

•Chapter Hardware connection and first power up on page 19 describes the

hardware installation procedures.

Note



Please read through this manual carefully.

For more information, see

http://www.alliedvisiontec.com/emea/support/downloads/

product-literature.html

Version Date Description

V2.0.0 03.11.11 New Manual How to install a GigE camera (Bigeye/Pearleye/

Goldeye)

V2.1.0 04.05.12 • Reworked and updated all chapters.

• Corrected screen shot in Chapter Start the continuous snap

on page 23

Table 1: Document history