Manual

Introduction
GUPPY Technical Manual V7.1.0
12
continued from last page
V6.0.2 31.03.08 Minimum shutter time of Guppy F-036B/C is now 180 µs: see
Chapter Guppy F-036B/C on page 33 and Chapter Minimum
shutter time of GUPPY F-036 on page 182.
Added note: Guppy F-036 supports only Trigger_Mode_0. See
Chapter Trigger modes on page 170.
Corrected drawing in Figure 60: Format_7 Mode_0: Sensor
readout on page 110 (lines of the first field are merged above
those of the second field)
Moved AVT Glossary from Appendix of GUPPY Technical Manual
to AVT Website.
New M3 x 3 (2x) in Figure 23: Camera dimensions (new CS-/C-
Mounting) on page 65
V6.1.0 09.07.08 New ordering numbers of I/O cables K1200196 (2 m) and
K1200197 (5 m) in Chapter Camera I/O connector pin assign-
ment on page 75
New board level CAD drawing and marked Pin 1 with blue color
in Figure 32: Board level camera: IEEE 1394 FireWire connec-
tor 1 (view on pins) on page 74
Restructuring of Guppy Technical Manual:
• Added Chapter Contacting Allied Vision Technologies on
page 9
• Added Chapter Manual overview on page 18
• Restructured Chapter Guppy types and highlights to Chap-
ter Guppy cameras on page 23.
– Infos from Guppy camera types table moved to Chapter
Specifications on page 29
– Safety instructions moved to Hardware Installation
Guide, Chapter Safety instructions and AVT camera
cleaning instructions
– Environmental conditions moved to Guppy Instruction
Leaflet and Guppy Board Level Instruction Leaflet
– Infos on CS-/C-Mounting moved to Hardware Installa-
tion Guide, Chapter GUPPY: changing filters safety
instructions
– Infos on System components moved to Guppy Instruc-
tion Leaflet and Guppy Board Level Instruction Leaflet
to be continued on next page
Version Date Remarks
Table 1: Document history