Manual

Introduction
GUPPY Technical Manual V7.1.0
13
continued from last page
V6.1.0
[continued]
09.07.08
[continued]
Restructuring of Guppy Technical Manual [continued]:
– Infos on System components and Environmental condi-
tions moved to Guppy Instruction Leaflet and Guppy
Board Level Instruction Leaflet
– Infos on IR cut filter and Lenses moved to Chapter Fil-
ter and lenses on page 26
– Removed infos on old CS-/C-Mounting in Chapter Spec-
ifications on page 29
– Moved binning explanation from Chapter Specifica-
tions on page 29 to Chapter Video formats, modes and
bandwidth on page 190
– Binning / sub-sampling modes and color modes are
only listed in Chapter Video formats, modes and band-
width on page 190
– Moved detailed description of the camera interfaces
(FireWire, I/O connector), ordering numbers and oper-
ating instructions to the Hardware Installation Guide.
– Revised Chapter Description of the data path on page
98
– Revised Chapter Controlling image capture on page
167; added Table 59: Trigger modes on page 170
– Revised Chapter Video formats, modes and bandwidth
on page 190
– Revised Chapter How does bandwidth affect the frame
rate? on page 219
– Revised Chapter Configuration of the camera on page
224
– Revised Chapter Firmware update on page 284
– Added Chapter Sensor position accuracy of AVT cam-
eras on page 285
– Revised Chapter Index on page 286
Changed provisions directive to 2004/108/EG in Chapter Dec-
larations of conformity on page 24
Added Chapter Packed 12-Bit Mode on page 153
Added tables Table 34: Packed 12-Bit Mode (mono and raw) Y12
format from AVT on page 95 and Table 35: Data structure of
Packed 12-Bit Mode (mono and raw) from AVT on page 97.
to be continued on next page
Version Date Remarks
Table 1: Document history