Manual

Introduction

GUPPY Technical Manual V7.1.0

continued from last page

V7.1.0 07.05.09 All advanced registers in 8-digit format beginning with 0xF1...

in Chapter Advanced features (AVT-specific) on page 254ff.

Firing a new trigger while IntEna is still active can result in

missing image (not image corruption): see Caution on page

88.

Revised Chapter White balance on page 114ff.

New Features: Guppy F-503:

• Defect pixel correction in Chapter Defect pixel correction

(only Guppy F-503B/C) on page 133 and Table 120:

Advanced register: Defect pixel correction on page 268

• More gain steps in Table 42: Manual gain range of the var-

ious GUPPY types (CCD and CMOS) on page 123

• Global reset release shutter in Chapter Electronic rolling

shutter (ERS) and global reset release shutter (GRR) (only

Guppy F-503) on page 169

• Format_7 mode mapping in Chapter Binning and sub-sam-

pling access (only Guppy F-503) on page 151ff. and Chap-

ter Format_7 mode mapping (only Guppy F-503) on page

280f.

• Description of Trigger_Mode_0 with electronic rolling

shutter and global reset release shutter in Chapter Trigger

modes on page 170ff.

• Changing between electronic rolling shutter (ERS) and

global reset release shutter (GRR) in Table 133: Advanced

• Max. exposure time in Chapter Extended shutter on page

264

Changed sensor name from Micron to Micron/Aptina in Table

9: Specification Guppy F-036B/C on page 33

Changed sensor name from Micron to Micron/Aptina in Table

18: Specification Guppy F-503B/C on page 51

Changed sensor name from Micron to Micron/Aptina in Chapter

HDR (high dynamic range) (GUPPY F-036 only) on page 154ff.

Changed sensor name from Micron to Micron/Aptina in Chapter

Controlling image capture on page 167

to be continued on next page

Version Date Remarks

Table 1: Document history