Manual

Introduction
GUPPY Technical Manual V7.1.0
19
•Chapter Declarations of conformity on page 24 gives you information
about conformity of AVT cameras.
•Chapter Filter and lenses on page 26 describes the IR cut filter and suit-
able camera lenses.
•Chapter Specifications on page 29 lists camera details and spectral sen-
sitivity diagrams for each camera type.
•Chapter Camera dimensions on page 63 provides CAD drawings of stan-
dard housing (copper) models and board level models, tripod adapter,
cross sections of CS-Mount and C-Mount.
•Chapter Camera interfaces on page 73 describes in detail the inputs/
outputs of the cameras (incl. trigger features). For a general description
of the interfaces (FireWire and I/O connector) see Hardware Installa-
tion Guide.
•Chapter Description of the data path on page 98 describes in detail IIDC
conformable as well as AVT-specific camera features.
•Chapter Controlling image capture on page 167 describes shutter and
trigger modi, exposure time, one-shot/multi-shot/ISO_Enable features
and jitter.
•Chapter Video formats, modes and bandwidth on page 190 lists all avail-
able fixed and Format_7 modes (incl. color modes, frame rates, binning/
sub-sampling, AOI=area of interest).
•Chapter How does bandwidth affect the frame rate? on page 219 gives
some considerations on bandwidth details.
•Chapter Configuration of the camera on page 224 lists standard and
advanced register descriptions of all camera features.
•Chapter Firmware update on page 284 explains where to get information
on firmware updates.
•Chapter Appendix on page 285 lists the sensor position accuracy of AVT
cameras.
•Chapter Index on page 286 gives you quick access to all relevant data in
this manual.