Manual

Configuration of the camera

GUPPY Technical Manual V7.1.0

276

Soft reset

The SOFT_RESET feature is similar to the INITIALIZE register, with the follow-

ing differences:

• 1 or more bus resets will occur

• the FPGA will be rebooted

The reset can be delayed by setting the Delay to a value unequal to 0 - the

delay is defined in 10 ms steps.

0xF1000510 SOFT_RESET Presence_Inq [0] Indicates presence of this

feature (read only)

--- [1..5] Reserved

Reset [6] Initiate reset

--- [7..19] Reserved

Delay [20..31] Delay reset in 10 ms steps

Table 127: Advanced register: Soft reset

Note



When SOFT_RESET has been defined, the camera will respond

to further read or write requests but will not process them.