Manual

Specifications

GUPPY Technical Manual V7.1.0

Guppy F-503B/C

Feature Specification

Image device Type 1/2.5 (diag. 7.13 mm) Micron/Aptina CMOS MT9P031 with

microlens

• Electronic rolling shutter (ERS)

• Global reset release shutter (GRR)

Effective chip size 5.7 mm x 4.3 mm

Cell size 2.2 µm x 2.2 µm

Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical

flange back to filter distance: 9.5 mm

(see Figure 29: Guppy C-Mount dimensions on page 71)

CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical

flange back distance: 8 mm

(see Figure 30: Guppy CS-Mount dimensions on page 72)

Picture size (max.) 2592 x 1944 pixels (Format_7 Mode_0)

ADC 12 bit

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps

variable frame rates in Format_7 up to 6.5 fps

Gain control Manual: 0-26 dB (average ~0.928 dB/step) for details see Chapter

Manual gain on page 122

Shutter speed 41.8 µs … ~2.3 s

External trigger shutter Trigger_Mode_0, trigger delay, IntEna delay

Look-up table One, user programmable (10 bit  8 bit); gamma (0.5)

Smart functions • AGC (auto gain control), LUT (look-up table), mirror (horizon-

tal and vertical), defect pixel correction, 2x - 4x binning (hori-

zontal: additive or average; vertical: average) or sub-sampling,

multi-shot, separate reference AOI for auto features

only color: AWB (auto white balance)

• one configurable input, three configurable outputs

• RS-232 port (serial port, IIDC V1.31)

Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s

Digital interface IEEE 1394a IIDC V1.3, single port

Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE

Power consumption Less than 2 watt (@ 12 V DC)

Dimensions 48.2 mm x 30 mm x 30 mm (L x W x H); w/o tripod and lens

Mass 50 g (without lens)

Operating temperature + 5 °C ... + 45 °C housing temperature (without condensation)

Table 18: Specification Guppy F-503B/C