Manual

Camera interfaces

GUPPY Technical Manual V7.1.0

Camera interfaces

This chapter gives you detailed information on status LEDs, inputs and out-

puts, trigger features and transmission of data packets.

IEEE 1394a port pin assignment

The IEEE 1394a plug is designed for industrial use and has the following pin

assignment as per specification:

Note



For a detailed description of the camera interfaces

(FireWire, I/O connector), ordering numbers and operat-

ing instructions see the Hardware Installation Guide.

Read all Notes and Cautions in the Hardware Installation

Guide, before using any interfaces.

Figure 31: IEEE 1394 connector

Note



Cables with latching connectors on one or both sides can be

used and are available with various lengths of 4.5 m or up to

17.5 m. Ask your local dealer for more details.

Pin Signal

1Cable power

2Cable GND

3TPB-

4TPB+

5TPA-

6TPA+