Manual

Camera interfaces

GUPPY Technical Manual V7.1.0

Camera I/O connector pin assignment

The camera I/O connector is designed for industrial use.

It provides:

• access to the inputs and outputs on the camera

• a serial interface

The following diagrams show the pinning as viewed in pin direction.

Signal Pin Pin Signal

TPA+ 61TPA-

- 72GND

TPB+ 83TPB-

- 94Cable power

- 10 5 Cable shield

Table 19: Board level camera: IEEE 1394a pin assignment (FireWire connector 1)

Note



The part number of the appropriate straight I/O connector is:

• HIROSE HR25-7TP-8S, AVT article number K7600503

AVT also supplies various I/O cables of different lengths, a

selection is listed below:

I/O cable, open 8-pin HIROSE female to open end, 2.0 m K1200196

I/O cable, open 8-pin HIROSE female to open end, 5 m K1200197