Manual

Camera interfaces

GUPPY Technical Manual V7.1.0

Output modes

The Polarity setting refers to the input side of the inverting driver.

ID Mode Default

0x00 Off

0x01 Output state follows PinState bit

0x02 Integration enable

Output 1

0x03 Reserved

0x04 Reserved

0x05 Reserved

0x06 FrameValid

0x07 Busy

Output 2

0x08 Follow corresponding input

(Inp1  Out1)

0x09 PWM (=pulse-width modulation) Only Guppy board level cameras

0x0A..0x1F Reserved

Table 29: Output routing

Note



The output mode 0x08 is not available for output pins

directly tied to an input pin.