User Manual

Safety instructions

FireWire Hardware Installation Guide V8.0.0

Caution



Board level cameras: General Warnings

• Be sure that all power to your board level cameras is

switched off, before mounting the sensor board or making

connections to the camera.

• Do not connect or disconnect any cables during an elec-

trical storm.

• Do not use your board level cameras during an electrical

storm.

• To help avoid possible damage to the sensor board or

main board, wait 5 seconds after power is switched off,

before connecting or disconnecting any cable to the

board level cameras.

• Ensure that nothing rests on the cables of your board

level cameras.

• Keep your board level cameras away from radiators and

heat sources.

• Do not spill food or liquids on your board level cameras.

Caution



Board level cameras: Loading

• Avoid any mechanical forces to the board level cameras,

the boards and its components, especially torsional, ten-

sile and compressive forces. Any of these forces may

result in damage of the board level cameras, the boards

and its components.

• To avoid damages of the boards, provide cables with an

external pull relief so that no force is applied to the con-

nectors itself.

Caution



Board level cameras: Dirty environments

• Always use clean boards.

• To protect the boards from dirt like dust, liquids or swarf

always use the board level cameras only in clean room

environment or use a protective housing.