User Manual

AVT camera cleaning instructions
FireWire Hardware Installation Guide V8.0.0
31
6. If despite warnings you want to clean your camera with compressed air:
7. Please gently blow the impurities off with dust-filtered, oil-free air
(< 1 bar). Using ionized air will help to remove any dirt stuck to the opti-
cal component because of static electricity.
Figure 6: Don’t use compressed air
Caution

• Use an air blower/compressed air only if you are familiar
with cleaning a camera with this instrument.
• Compressed air may push dust into cameras and
lenses. Therefore keep the pressure at a moderate
strength only:
– The pressure at the tube should be less than 1 bar
– operating distance: 5-30 cm
Note

If dust spots remain after cleaning twice, please contact your
AVT dealer.