User Manual

Camera interfaces
FireWire Hardware Installation Guide V8.0.0
39
IEEE 1394a port pin assignment
(Oscar, Marlin, Guppy)
The IEEE 1394a connector is designed for industrial use and has the following
pin assignment as per specification:
Figure 9: IEEE 1394a connector
Note

Cables with latching connectors on one or both sides can be
used and are available with various lengths from 0.5 m to
17.5 m. Ask your local dealer for more details.
www

For more information on cables and on ordering cables
online (by clicking the article and sending an inquiry) go to:
http://www.alliedvisiontec.com/emea/products/
accessories/firewire-accessories.html
Pin Signal
1Cable power
2Cable GND
3TPB-
4TPB+
5TPA-
6TPA+