User Manual

Camera interfaces

FireWire Hardware Installation Guide V8.0.0

IEEE 1394b port pin assignment

(Guppy PRO, Pike, Stingray)

The IEEE 1394b connector is designed for industrial use and has the following

pin assignment as per specification:

Figure 11: IEEE 1394b connector

Note



• Both IEEE 1394b connectors with screw lock mechanism

provide access to the IEEE 1394 bus and thus makes it

possible to control the camera and output frames. Con-

nect the camera by using either of the connectors. The

other connector can be used to daisy chain a second cam-

era.

• Cables with latching connectors on one or both sides can

be used. Ask your local dealer for more details.

www



For more information on cables and on ordering cables

online (by clicking the article and sending an inquiry) go to:

http://www.alliedvisiontec.com/emea/products/

accessories/firewire-accessories.html

56789

Pin Signal

1TPB-

2TPB+

3TPA-

4TPA+

5 TPA (Reference ground)

6VG (GND)

7N.C.

8VP (Power, VCC)

9 TPB (Reference ground)