User Manual

Camera interfaces
FireWire Hardware Installation Guide V8.0.0
73
Guppy output description
Guppy output block diagram
(For board level see Chapter Guppy (board level) IO block diagram on page 75)
Figure 36: Guppy: output block diagram
Caution

Guppy
Max. 20 mA per output
OutVCC Resistor value
5 V 1 k 5 mA load
recommended
Figure 37: Guppy: OutVCC and external resistor
Note

Guppy F-503:
IntEna is high, when all pixels are integrated simultaneously.
 Using IntEna with electronic rolling shutter and global reset
release shutter: see Guppy Technical Manual, Chapter Trigger
modi.
externalinternal
GPOut1
GPOutX
GND GND
GND GND