User Manual

Controlling image capture
Guppy PRO Technical Manual V4.0.0
161
In this case the camera can resynchronize the horizontal clock to the new
trigger event, leaving only a very short uncertainty time of the master clock
period.
Model Exposure start jitter
(while FVal)
Exposure start jitter
(while camera idle)
Guppy PRO F-031  14.2 µs  2.9 µs
Guppy PRO F-032  24.3 µs  3.0 µs
Guppy PRO F-033  23.4 µs  2.6 µs
Guppy PRO F-046  27.4 µs  2.6 µs
Guppy PRO F-095  35 µs  6.9 µs
Guppy PRO F-125 33.2 µs 5.0 µs
Guppy PRO F-146  56.0 µs  13.7 µs
Guppy PRO F-201  29.5 µs  10.3 µs
Guppy PRO F-503 not applicable not applicable
Table 67: Jitter at exposure start (no binning, no sub-sampling)
Note

• Jitter at the beginning of an exposure has no effect on
the length of exposure, i.e. it is always constant.