User Manual

Introduction
Guppy PRO Technical Manual V4.0.0
17
Manual overview
This manual overview describes each chapter of this manual shortly.
•Chapter Contacting Allied Vision Technologies on page 9 lists AVT con-
tact data for both:
– technical information / ordering
–commercial information
•Chapter Introduction on page 10 (this chapter) gives you the document
history, a manual overview and conventions used in this manual (styles
and symbols). Furthermore you learn how to get more information on
how to install hardware (Hardware Installation Guide), available AVT
software (incl. documentation) and where to get it.
•Chapter Guppy PRO cameras on page 21 gives you a short introduction
to the Guppy PRO cameras with their FireWire technology. Links are pro-
vided to data sheets and brochures on AVT website.
•Chapter Conformity on page 22 gives you information about conformity
of AVT cameras.
•Chapter FireWire on page 23 describes the FireWire standard in detail,
explains the compatibility between 1394a and 1394b and explains
bandwidth details (incl. Guppy PRO examples).
V4.0.0 23 July 2012 Deleted Active FirePackage in Chapter Specifications on page
13 ff.
New Guppy PRO F-095C
• Table 4: Bandwidth of Guppy PRO cameras on page 31
• Table 9: Focal length vs. field of view (Guppy PRO F-095)
on page 36
•Chapter Guppy PRO F-095C on page 46
•Chapter Exposure time offset on page 154
•Chapter Minimum exposure time on page 154
•Chapter Jitter at exposure start (no binning, no sub-
sampling) on page 161
•Chapter End of exposure to first packet on the bus on
page 158
•Chapter Guppy PRO F-095C on page 171
•Chapter Guppy PRO F-095: AOI frame rates on page 193
• Figure 15: Spectral sensitivity of Guppy PRO F-095C
(without IR cut filter) on page 61
• Power consumption: typically < 3.5 W, see Chapter Guppy
PRO F-095C on page 46
Version Date Remarks
Table 1: Document history