User Manual

Configuration of the camera
Guppy PRO Technical Manual V4.0.0
268
Pulse-width modulation (PWM)
Global reset release shutter
(only Guppy PRO F-503)
Note

• A profile save operation automatically disables captur-
ing of images.
• A profile save or restore operation is an uninterruptable
(atomic) operation. The write response (of the asyn-
chronous write cycle) will be sent after completion of
the operation.
• Restoring a profile will not overwrite other settings
than listed above.
• If a restore operation fails or the specified profile does
not exist, all registers will be overwritten with the
hard-coded factory defaults (profile #0).
• Data written to this register will not be reflected in the
standard memory channel registers.
Note

See Table 31: PWM configuration registers on page 85.
Offset Name Field Bit Description
0xF10005C0 GLOBAL_RES_REL_SHUTTER Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..5] Reserved
ON_OFF [6] Global reset release shutter on/
off.
If off, then electronic rolling
shutter will be used.
--- [7..31] Reserved
Table 149: Advanced register: Global reset release shutter