User Manual

Camera interfaces

Guppy PRO Technical Manual V4.0.0

Camera interfaces

This chapter gives you detailed information on status LEDs, inputs and out-

puts, trigger features and transmission of data packets.

IEEE 1394b port pin assignment

The IEEE 1394b connector is designed for industrial use and has the following

pin assignment as per specification:

Note



For a detailed description of the camera interfaces

(FireWire, I/O connector), and operating instructions see

the Hardware Installation Guide, Chapter Camera inter-

faces.

Read all Notes and Cautions in the Hardware Installation

Guide, before using any interfaces.

Figure 27: IEEE 1394b connector

Note



• IEEE 1394b connectors with screw lock mechanism

provide access to the IEEE 1394 bus and thus makes it

possible to control the camera and output frames.

56789

Pin Signal

1TPB-

2TPB+

3TPA-

4TPA+

5 TPA (Reference ground)

6VG (GND)

7N.C.

8 VP (Power, VCC)

9 TPB (Reference ground)