User Manual
Controlling image capture
Guppy PRO Technical Manual V4.0.0
158
End of exposure to first packet on the bus
After the exposure, the CCD sensor is read out; some data is written into the
FRAME_BUFFER before being transmitted to the bus.
The time from the end of exposure to the start of transport on the bus is:
710 µs ± 62.5 µs
This time jitters with the cycle time of the bus (125 µs).
Figure 74: Data flow and timing after end of exposure
OneShot Command
Decode command
Exposure
Integration-Start
Timebase Reg.
X
Shutter-Reg.
Offset
Processing Delay
< 150s
Guppy PRO F-031: 75 µs
Guppy PRO F-032: 37 µs
Guppy PRO F-033: 31 µs
Guppy PRO F-046: 31 µs
Guppy PRO F-095: 43 µs
Guppy PRO F-125: 39 µs
Guppy PRO F-146: 45 µs
Guppy PRO F-201: 55 µs
Guppy PRO F-503:
See chapter Exposure time
of Guppy PRO F-503
Timebase x Shutter + Offset = Exposure Time
First Packet on Bus
< 710s
+/-62.5 s