User Manual

Configuration of the camera

Guppy PRO Technical Manual V4.0.0

228

Status and control registers for camera

600h

CUR-V-Frm_RATE/Revision

Bit [0..2] for the frame rate

604h CUR-V-MODE Bit [0..2] for the current video mode

608h CUR-V-FORMAT Bit [0..2] for the current video format

60Ch ISO-Channel Bit [0..3] for channel, [6..7] for ISO speed

610h Camera_Power Always 0

614h

ISO_EN/Continuous_Shot

Bit 0: 1 for start continuous shot; 0 for stop continuos shot

618h Memory_Save Always 0

61Ch One_Shot, Multi_Shot,

Count Number

See Chapter One-shot on page 156

See Chapter Multi-shot on page 159

620h Mem_Save_Ch Always 0

624 Cur_Mem_Ch Always 0

628h Vmode_Error_Status Error in combination of Format/Mode/ISO Speed:

Bit(0): No error; Bit(0)=1: error

62Ch Software_Trigger Software trigger

Write:

0: Reset software trigger

1: Set software trigger (self cleared, when using edge mode; must

be set back to 0 manually, when using level mode)

Read:

0: Ready (meaning: it’s possible to set a software trigger)

1: Busy (meaning: no trigger possible)

Table 116: Status and control registers for camera