User Manual

Specifications

Guppy PRO Technical Manual V4.0.0

Specifications

Guppy PRO F-031B/C

Note



• For information on bit/pixel and byte/pixel for each

color mode see Table 99: ByteDepth on page 200.

• Maximum protrusion means the distance from lens

flange to the glass filter in the camera.

Feature Specification

Image device Type 1/4 (diag. 4.5 mm) progressive scan SONY IT CCD ICX618AL/AQA

with EXview HAD microlens

Effective chip size 3.6 mm x 2.7 mm

Cell size 5.6 µm x 5.6 µm

Picture size (max.) 656 x 492 pixels (Format_7 Mode_0)

Lens mount Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)

maximum protrusion: 10.1 mm

(see Figure 26: Guppy PRO C-Mount dimensions on page 68)

ADC 14 bit

Color modes Only color: Raw8, Raw12, Raw16, Mono8, YUV411, YUV422, RGB8

Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps; 120 fps 

Up to 123 fps in Format_7

Gain control Manual: 0-24.4 dB (0.0359 dB/step); auto gain (select. AOI)

Shutter speed 75 µs … 67,108,864 µs (~ 67 s); auto shutter (select. AOI)

External trigger shutter Programmable, trigger level control, single trigger,

bulk trigger, programmable trigger delay

Look-up tables User programmable (12 bit  10 bit); default gamma (0.45)

Table 12: Specification Guppy PRO F-031B/C

Note



Maximum protrusion means the distance from lens flange to

the glass filter in the camera.