User Manual

Camera dimensions
Guppy PRO Technical Manual V4.0.0
69
Adjustment of C-Mount
The dimensional adjustment cannot be done any more by the customer. All
adjustments have to be done by the AVT factory.
Adjustment is only done (via adjustment spacer between lens and front
flange), if the customer needs accuracy below 100 µm.
If you need any adjustments, please contact Customer Care: For phone
numbers and e-mail: See Chapter Contacting Allied Vision Technologies on
page 9.
Note

For all customers who know the C-Mount adjustment proce-
dure from Pike and Oscar cameras:
The front flange of Guppy PRO cameras is a fixed part of the
camera (and cannot be screwed).
As mentioned above: adjustment of C-Mount with Guppy
PRO cameras can only be done by the AVT factory.