Instruction manual

Guppy Technical ManualV7.4.0
12
Introduction
continued from previous page
V6.0.2 31.03.2008 Minimum shutter time of Guppy F-036B/C is now 180 μs: see
Chapter Guppy F-036B/C on page 28 and Chapter Minimum shut-
ter time of Guppy F-036 on page 156.
Added note: Guppy F-036 supports only Trigger_Mode_0. See
Chapter Trigger modes on page 144.
Corrected drawing in Figure 52: Format_7 Mode_0: Sensor read-
out on page 87 (lines of the first field are merged above those of
the second field)
Moved Allied Vision Glossary from Appendix of Guppy Technical
Manual to Allied Vision Website.
New M3 x 3 (2x) in Figure 22: Camera dimensions (new CS-/C-
Mounting) on page 51
V6.1.0 09.07.2008 New ordering numbers of I/O cables K1200196 (2 m) and
K1200197 (5 m) in Chapter Camera I/O connector pin assign-
ment on page 59
New board level CAD drawing and marked Pin 1 with blue color in
Figure 32: Board level camera: IEEE 1394 FireWire connector 1
(view on pins) on page 66
Restructuring of Guppy Technical Manual:
• Added Chapter Contacting Allied Vision on page 9
• Added Chapter Manual overview on page 21
• Restructured Chapter Guppy types and highlights to Chap-
ter Guppy cameras on page 25.
– Infos from Guppy camera types table moved to Chapter
Specifications on page 27
– Safety instructions moved to Hardware Installation
Guide, Chapter Safety instructions and Allied Vision
camera cleaning instructions
– Environmental conditions moved to Guppy Instruction
Leaflet and Guppy Board Level Instruction Leaflet
– Infos on CS-/C-Mounting moved to Hardware Installa-
tion Guide, Chapter Guppy: changing filters safety
instructions
– Infos on System components moved to Guppy Instruc-
tion Leaflet and Guppy Board Level Instruction Leaflet
to be continued on next page
Version Date Remarks
Table 1: Document history