Instruction manual

Guppy Technical ManualV7.4.0
15
Introduction
continued from previous page
V6.2.0 15.08.2008 Added cross-reference from upload LUT to GPDATA_BUFFER in
Chapter Loading an LUT into the camera on page 107
Added Guppy F-146 with Mono8 (8-bit format) and Mono12/16
(12-bit format) in Chapter Pixel data on page 70. In 12-bit mode
the data output is MSB aligned (12 significant bits). In 16-bit
mode the data output is MSB aligned (also 12 significant bits).
Added detailed level values of I/Os in Chapter Guppy (housing)
on page 59 and Chapter Guppy (board level) on page 68.
Added little endian vs. big endian byte order in Chapter
GPDATA_BUFFER on page 257
Added RoHS in Chapter Conformity on page 26
Listed shutter speed with offset in Chapter Specifications on
page 27
New measurement of IntEna signals, therefore new offsets in
Chapter Exposure time (shutter) and offset on page 155 and in
Figure 96: Data flow and timing after end of exposure (Guppy F-
038/044 also NIR) on page 160.
New photo of LED positions in Figure 29: Status LEDs on page 60
to be continued on next page
Version Date Remarks
Table 1: Document history