Instruction manual

Guppy Technical ManualV7.4.0
151
Controlling image capture
The screenshots below illustrate the use of Trigger_Mode_15 on a register level:
• The first line switches continuous mode off, leaving viewer in listen mode.
• The second line prepares 830h register for external trigger and Mode_15.
Left = continuous Middle = one-shot Right = multi-shot
The last line switches camera
back to continuous mode. Only
one image is grabbed precisely
with the first external trigger.
To repeat rewrite line three.
Toggle one-shot bit [0] of the
One_Shot register 61C so that
only one image is grabbed, based
on the first external trigger.
To repeat rewrite line three.
Toggle multi-shot bit [1] of the
One_Shot register 61C so that Ah
images are grabbed, starting with
the first external trigger.
To repeat rewrite line three.
Table 55: Description: using Trigger_Mode_15: continuous, one-shot, multi-shot
Figure 94: Using Trigger_Mode_15: continuous, one-shot, multi-shot
Note

Shutter for the images is controlled by shutter register.