Instruction manual

Guppy Technical ManualV7.4.0
16
Introduction
continued from previous page
V7.0.0 31.10.2008 Operating temperature changed from 50 °C to 45 °C for all Guppy
types in Chapter Specifications on page 27
New Guppy camera photos with new camera naming font:
•Title page
New Guppy F-503B/C: Read information in the following sec-
tions:
•Chapter Conformity on page 26
• Table 14: Focal width vs. field of view (Guppy F-503) on
page 56
•Chapter Specification Guppy F-503B/C on page 38
•Chapter Horizontal and vertical mirror function (only
Guppy F-036/F-503) on page 90
•Chapter White balance on page 90
•Chapter Manual gain on page 98
•Chapter Brightness (black level or offset) on page 102
•Chapter Look-up table (LUT) and gamma function on page
106
•Chapter Binning (only Guppy F-036B and Guppy F-503B/C)
on page 113
•Chapter Packed 12-Bit Mode on page 128.
This mode is not yet available for Guppy F-503B/C.
•Chapter Exposure time (shutter) and offset on page 155
• Table 59: Camera-specific exposure time offset on page 156
• Figure 96: Data flow and timing after end of exposure
(Guppy F-038/044 also NIR) on page 160
• Table 64: Jitter at exposure start on page 162
• Table 74: Video formats Guppy F-503B / Guppy F-503C on
page 172
• Guppy F-503: AOI frame rates on page 191
• Table 105: Camera type ID list on page 232
For Guppy F-503B/C output switching times (tp and min.
shutter) see Hardware Installation Guide, subsection Guppy
delay.
to be continued on next page
Version Date Remarks
Table 1: Document history