Instruction manual

Guppy Technical ManualV7.4.0

Introduction

continued from previous page

V7.1.0 07.05.2009 All advanced registers in 8-digit format beginning with 0xF1... in

Chapter Advanced features (Allied Vision-specific) on page 228

Firing a new trigger while IntEna is still active can result in miss-

ing image (not image corruption): see Caution on page 70.

Revised Chapter White balance on page 90

New Features: Guppy F-503:

• Defect pixel correction in Chapter Defect pixel correction

(only Guppy F-503B/C) on page 108 and Table 115:

Advanced register: Defect pixel correction on page 243

• More gain steps in Table 36: Manual gain range of the vari-

ous Guppy types (CCD and CMOS) on page 99

• Global reset release shutter in Chapter Electronic rolling

shutter (ERS) and global reset release shutter (GRR) (only

Guppy F-503) on page 143

• Format_7 mode mapping in Chapter Binning and sub-sam-

pling access (only Guppy F-503) on page 125 and Chapter

Format_7 mode mapping (only Guppy F-503) on page 255

• Description of Trigger_Mode_0 with electronic rolling shut-

ter and global reset release shutter in Chapter Trigger

modes on page 144

• Changing between electronic rolling shutter (ERS) and

global reset release shutter (GRR) in Table 128: Advanced

• Max. exposure time in Chapter Extended shutter on page

238

Changed sensor name from Micron to Micron/Aptina in Table 4:

Specification Guppy F-036B/C on page 28

Changed sensor name from Micron to Micron/Aptina in Table 12:

Specification Guppy F-503B/C on page 38

Changed sensor name from Micron to Micron/Aptina in Chapter

HDR (high dynamic range) (Guppy F-036 only) on page 129

Changed sensor name from Micron to Micron/Aptina in Chapter

Controlling image capture on page 141

to be continued on next page

Version Date Remarks

Table 1: Document history