Instruction manual

Guppy Technical ManualV7.4.0
20
Introduction
continued from previous page
V7.3.0 21.09.2010 Updated data:
• Corrected trigger diagram (Busy signal), see Figure 32:
Output impulse diagram on page 69
• Converted FrameMaker files from FM7 to FM9
• Corrected: mirror function is also available for Guppy F-
503, see Chapter Mirror image (only Guppy F-036/F-503)
on page 250
• Added Chapter Frame information on page 242
• Added advanced registers FRAMEINFO and FRAMECOUNTER
in Table 103: Advanced registers summary on page 228
V7.4.0 09.03.2015 Updated data:
• Corrected hyperlinks to targets on the Allied Vision website
• Added information that all color modes in Chapter Specifi-
cations on page 27 comply with the IIDC specifications
• Corrected information in Chapter Sensor position accuracy
of Guppy cameras on page 260
• Adapted addresses in Chapter Contacting Allied Vision on
page 9
• Corrected information for binning in Chapter Definition on
page 113
• Corrected list of cameras supporting Chapter Packed 12-Bit
Mode on page 128
• Updated spectral sensor curves in Chapter Spectral sensi-
tivity on page 39
• Deleted information on Guppy board level cameras
Layout changes due to a changed Corporate identity:
• Replaced the previous Allied Vision logo by the current one
• Reworded all appropriate contents from AVT and Allied
Vision Technologies to Allied Vision
Version Date Remarks
Table 1: Document history