Instruction manual

Guppy Technical ManualV7.4.0
200
Configuration of the camera
Sample program
The following sample code in C shows how the register is set for frame rate, video
mode/format and trigger mode using the FireCtrl DLL from the FirePackage
API. How the camera is switched into ISO_Enabled mode is also shown below:
…
WriteQuad(m_cmdRegBase + CCR_FRAME-RATE, Frame-Rate << 29);
WriteQuad(m_cmdRegBase + CCR_VMODE, mode << 29);
WriteQuad(m_cmdRegBase + CCR_VFORMAT, format << 29);
WriteQuad(m_cmdRegBase + CCR_TRGMODE, extTrigger ? 0x82000000 : 0);
Sleep(100);
WriteQuad(m_cmdRegBase + CCR_ISOENABLE, 0x80000000);
…
Figure 112: Configuration of the camera