Instruction manual
Guppy Technical ManualV7.4.0
250
Configuration of the camera
Mirror image (only Guppy F-036/F-503)
Guppy F-036/F-503 CMOS cameras are equipped with horizontal and vertical
mirror function. The mirror is centered to the actual FOV center and can be com-
bined with all image manipulation functions, like binning.
Soft reset
The SOFT_RESET feature is similar to the INITIALIZE register, with the following
differences:
• 1 or more bus resets will occur
• the FPGA will be rebooted
Register Name Field Bit Description
0xF1000410 MIRROR_IMAGE Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
HorzMirror_ON [6] Horizontal mirror on/off
1: on
0: off
Default: off
VertMirror_ON [7] Vertical mirror on/off
1: on
0: off
Default: off
--- [8..15] Reserved
HorzMirrorInq [16] Horizontal mirror presence
VertMirrorInq [17] Vertical mirror presence
--- [18..31] Reserved
Table 121: Advanced register: Mirror
Register Name Field Bit Description
0xF1000510 SOFT_RESET Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
Reset [6] Initiate reset
--- [7..19] Reserved
Delay [20..31] Delay reset in 10 ms steps
Table 122: Advanced register: Soft reset