Instruction manual
Guppy Technical ManualV7.4.0
38
Specifications
Guppy F-503B/C
Optional accessories • b/w: C/CS-Mount: IR cut filter / IR pass filter available as CS-Mount adapter.
• color: C/CS-Mount: protection glass available as CS-Mount adapter.
Software packages http://www.alliedvision.com/en/support/software-downloads (free of charge)
Feature Specification
Image device Type 1/2.5 (diag. 7.13 mm) Micron/Aptina CMOS MT9P031 with microlens
• Electronic rolling shutter (ERS)
• Global reset release shutter (GRR)
Effective chip size 5.7 mm x 4.3 mm
Cell size 2.2 μm x 2.2 μm
Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical flange back to filter
distance: 9.5 mm
(see Figure 24: Guppy C-Mount dimensions on page 53)
CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical flange back dis-
tance: 8 mm
(see Figure 25: Guppy CS-Mount dimensions on page 54)
Picture size (max.) 2592 x 1944 pixels (Format_7 Mode_0)
ADC 12 bit
Frame rates 1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps; 60 fps
variable frame rates in Format_7 up to 6.5 fps
Gain control Manual: 0-26 dB (average ~0.928 dB/step) for details see Chapter Manual gain on
page 98
Shutter speed 41.8 μs … ~2.3 s
External trigger shutter Trigger_Mode_0, trigger delay, IntEna delay
Look-up table One, user programmable (10 bit 8 bit); gamma (0.5)
Smart functions • AGC (auto gain control), LUT (look-up table), mirror (horizontal and vertical),
defect pixel correction, 2x - 4x binning (horizontal: additive or average; verti-
cal: average) or sub-sampling, multi-shot, separate reference AOI for auto
features
only color: AWB (auto white balance)
• one configurable input, three configurable outputs
• RS-232 port (serial port, IIDC V1.31)
Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s
Digital interface IEEE 1394a IIDC V1.3, single port
Table 12: Specification Guppy F-503B/C
Feature Specification
Table 11: Guppy F-146B/C