Instruction manual

Guppy Technical ManualV7.4.0
60
Camera interfaces
Status LEDs
On LED (green)
The green power LED indicates that the camera is being supplied with sufficient
voltage and is ready for operation.
Status LED
The following states are displayed via the LED:
Figure 29: Status LEDs
State Description
S1 (green) LED on - power on
LED off - power off
S2 (yellow) Asynchronous and isochronous data transmission
active (indicated asynchronously to transmission
over the 1394 bus)
Table 16: LED indication
Status LEDs
Yellow
(S2)
Green
(S1)