Instruction manual

Guppy Technical ManualV7.4.0
82
Description of the data path
Figure 47: Format_7 Mode_1: output (interlaced, frame)
Parameter Description
Output during first field Line 1, 3, ... are output as line 1, 3, ...
Output during second field Line 2, 4, ... are output as line 2, 4, ...
Sensitivity Half compared to field integration
Vertical resolution About 100% compared to progressive scan
Temporal resolution Lower (reason: two fields contain the full sensor information).
Electronic shutter Not possible due to overlap of integration time
Flashing Gives full resolution
IntEna can be used to synchronize the flash
Shutter (integration) Can only be set larger than one field, not shorter.
Color reproduction Possible, has to be done digitally in viewer (e.g. SmartView or by
separate UniTransform.dll)
Table 31: Format_7 Mode_1: output parameters (interlaced, frame)
1
st
fi
e
l
d
2
n
d
fi
e
ld
3
r
d
f
i
e
l
d
4
th
fie
l
d
1st
field
2nd
field
1st
field
2nd
field