Instruction manual

Guppy PRO Technical ManualV4.1.0

Introduction

This Guppy PRO Technical Manual describes in depth the technical specifica-

tions, dimensions, all camera features (IIDC standard and Allied Vision smart

features) and their registers, trigger features, all video and color formats, band-

width and frame rate calculation.

For information on hardware installation, safety warnings, pin assignments on

I/O connectors and 1394b connectors read the 1394 Installation Manual.

Document history

Note



Please read through this manual carefully.

We assume that you have read already the 1394 Installation

Manual (see: http://www.alliedvision.com/en/support/tech-

nical-documentation) and that you have installed the hard-

ware and software on your PC or laptop (FireWire card, cables).

Version Date (dd.mm.yy) Remarks

V2.0.1 30.11.10 New Manual — RELEASE status

V2.0.2 05.04.11 • Revised video formats of Guppy PRO F-503, Table 89: Video

Format_7 default modes Guppy PRO F-503B / F-503C on

page 156

• Added exposure time offset for Guppy PRO F-503, Table 65:

Camera-specific exposure time offset on page 132

•Added On request: power out 6 W (HIROSE) in all

specification tables: see chapter Specifications on page 34

to 43

• Revised advanced register: input control (only one input) in

Table 24 : Advanced register: Input control on page 67

• Revised IO_INP_CTRL: ID 0x3..0x1F is Reserved in Table 25 :

Input routing on page 67

• Revised advanced register: output control (3 outputs) in

Table 30 : Advanced register: Output control on page 71

• At register 0xF1000200 changed width and height: see Table

130: Advanced register: Maximum resolution inquiry on

page 214

• YUV8: deleted description of data type straight binary: Table

41: Data structure of YUV8; Source: IIDC V1.31 on page 79

to be continued on next page

Table 1: Document history