Instruction manual

Guppy PRO Technical ManualV4.1.0
110
Description of the data path
Binning and sub-sampling access (F-503 only)
The binning and sub-sampling modes described in the last two chapters are only
available as pure binning or pure sub-sampling modes. A combination of both is
not possible.
As you can see there is a vast amount of possible combinations. But the number
of available Format_7 modes is limited and lower than the possible combina-
tions.
Thus access to the binning and sub-sampling modes is implemented in the fol-
lowing way:
• Format_7 Mode_0 is fixed and cannot be changed
• A maximum of 7 individual Allied Vision modes can be mapped to
Format_7 Mode_1 to Mode_7
(see figure 60)
• Mappings can be stored via register (see chapter Format_7 mode mapping
(only Guppy PRO F-503) on page 231) and are uploaded automatically into
the camera on camera reset.
•The default settings (per factory) in the Format_7 modes are listed in the
following table
Figure 59: 2 out of 8 H+V sub-sampling (color)
Format_7 Guppy PRO monochrome Guppy PRO color
Mode_0 full resolution, no binning,
no sub-sampling
full resolution, no sub-sampling, no binning
Mode_1 2 x horizontal binning 2 x horizontal binning
Mode_2 2 x vertical binning 2 x vertical binning
Table 54: Default Format_7 binning and sub-sampling modes (per factory)
2 out of 8 H+V sub-sampling