Instruction manual

Guppy PRO Technical ManualV4.1.0
159
Video formats, modes and bandwidth
Autofunction AOI
Use this feature to select the image area (work area) on which the following aut-
ofunctions work:
• Auto shutter
• Auto gain
• Auto white balance
In the following screenshot you can see an example of the autofunction AOI:
As a reference it uses a grid of up to 65534 sample points equally spread over the
AOI.
Figure 74: Example of autofunction AOI (Show work area is on)
Note

Autofunction AOI is independent from Format_7 AOI settings.
If you switch off autofunction AOI, work area position and work
area size follow the current active image size.
To switch off autofunctions, carry out following actions in the
order shown:
1. Uncheck Show AOI check box (SmartView Ctrl2 tab).
2. Uncheck Enable check box (SmartView Ctrl2 tab).
Switch off Auto modes (e.g. Shutter and/or Gain) (SmartView
Ctrl2 tab).
Note

Configuration
To configure this feature in an advanced register see chapter
Autofunction AOI on page 225.
Work area