Instruction manual

Guppy PRO Technical ManualV4.1.0
17
Introduction
Manual overview
This manual overview describes each chapter of this manual shortly.
•chapter Contacting Allied Vision on page 9 lists Allied Vision contact data
for both:
– technical information / ordering
– commercial information
continued from previous page
V4.1.0 09.03.2015 Updated data:
• Corrected hyperlinks to targets on the Allied Vision website
• Removed outdated information in chapter Requirements for
PC and 1394b on page 30
• Added hyperlink to FireWire accessories on the Allied Vision
website in chapter Requirements for PC and 1394b on page
30
• Removed information on the Universal Package in chapter
Operating system support on page 33
• Reduced to the current information on the system require-
ments in chapter Operating system support on page 33
• Added information that all color modes in chapter Specifi-
cations on page 34 comply with the IIDC specifications
• Corrected information in chapter Sensor position accuracy
of Guppy PRO cameras on page 240
• Adapted addresses in chapter Contacting Allied Vision on
page 9
• Corrected information for binning in chapter Definition on
page 98
• Corrected block diagram for Guppy PRO color cameras in
chapter Block diagrams of the cameras on page 80
• Updated sensor curves in chapter Spectral sensitivity on
page 44
• Added information on CS-Mount in chapter Cross section:
CS-Mount on page 56
Layout changes due to a changed Corporate identity:
• Replaced the previous Allied Vision logo by the current one
• Reworded all appropriate contents from AVT and Allied
Vision Technologies to Allied Vision
Version Date (dd.mm.yy) Remarks
Table 1: Document history