Instruction manual

Guppy PRO Technical ManualV4.1.0
183
Configuration of the camera
The entry with key D1 in the root directory (424h in this case) provides the offset
for the unit directory as follows:
424h + 000004 x 4 = 434h
The entry with key D4 in the unit directory (440h in this case) provides the offset
for unit dependent info:
440h + 0000xx * 4 = 444h
Offset 0-7 8-15 16-23 24-31
428h 00 02
5E 9E
....CRC
Node unique ID leaf 42Ch
00 0A 47 01 ….Node_Vendor_Id,Chip_id_hi
430h
00 00 Serial number
Table 110: Configuration ROM
Offset 0-7 8-15 16-23 24-31
Unit directory
434h 00 03 93 7D
438h 12 00 A0 2D
43Ch 13 00 01 02
440h D4
00 00 01
Table 111: Configuration ROM
Offset 0-7 8-15 16-23 24-31
Unit dependent info
444h 00 0B
A9 6E ....unit_dep_info_length, CRC
448h 40
3C 00 00 ....command_regs_base
44Ch 81
00 00 02 ....vendor_name_leaf
450h 82
00 00 06 ....model_name_leaf
454h 38
00 00 10 ....unit_sub_sw_version
458h 39
00 00 00 ....Reserved
45Ch 3A
00 00 00 ....Reserved
460h 3B
00 00 00 ....Reserved
464h 3C
00 01 00 ....vendor_unique_info_0
468h 3D
00 92 00 ....vendor_unique_info_1
46Ch 3E
00 00 65 ....vendor_unique_info_2
470h 3F
00 00 00 ....vendor_unique_info_3
Table 112: Configuration ROM