Instruction manual

Guppy PRO Technical ManualV4.1.0

Introduction

More information

For more information on hardware and software read the following:

• 1394 Installation Manual describes the hardware installation procedures

for all 1394 cameras (Marlin, Guppy, Pike, Stingray). Additionally, you get

safety instructions and information about camera interfaces (IEEE1394a/b

copper and GOF, I/O connectors, input and output).

Before operation

We place the highest demands for quality on our cameras.

Target group This Technical Manual is the guide to detailed technical information of the cam-

era and is written for experts.

Getting started For a quick guide how to get started read 1394 Installation Manual first.

www



You find the 1394 Installation Manual here:

http://www.alliedvision.com/en/support/technical-docu-

mentation

www



All software packages (including documentation and release

notes) provided by Allied Vision can be downloaded at:

http://www.alliedvision.com/en/support/software-down-

loads

Note



Please read through this manual carefully before operating

the camera.

For information on Allied Vision accessories and software

read 1394 Installation Manual.

Caution



Before operating any Allied Vision camera read safety instruc-

tions and ESD warnings in 1394 Installation Manual.

Note



To demonstrate the properties of the camera, all examples in

this manual are based on the FirePackage OHCI API software

and the SmartView application.