Instruction manual
Guppy PRO Technical ManualV4.1.0
201
Configuration of the camera
Status and control registers for camera
Register Name Field Bit Description
600h
CUR-V-Frm_RATE/
Revision
Bit [0..2] for the frame rate
604h CUR-V-MODE Bit [0..2] for the current video mode
608h CUR-V-FORMAT Bit [0..2] for the current video format
60Ch ISO-Channel Bit [0..3] for channel, [6..7] for ISO speed
610h Camera_Power Always 0
614h
ISO_EN/Continuous_Shot
Bit 0: 1 for start continuous shot; 0 for stop continuous shot
618h Memory_Save Always 0
61Ch One_Shot, Multi_Shot,
Count Number
See chapter One-shot on page 134
See chapter Multi-shot on page 137
620h Mem_Save_Ch Always 0
624 Cur_Mem_Ch Always 0
628h Vmode_Error_Status Error in combination of Format/Mode/ISO Speed:
Bit(0): No error; Bit(0)=1: error
62Ch Software_Trigger Software trigger
Write:
0: Reset software trigger
1: Set software trigger (self-cleared, when using edge mode;
must be set back to 0 manually, when using level mode)
Read:
0: Ready (meaning: it’s possible to set a software trigger)
1: Busy (meaning: no trigger possible)
Table 120: Status and control registers for camera